[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: |
"Heidi/Nick Hoke" <kingstonhokes-at-comcast.net> |
Subject: |
RE: battery packs [TANKS] |
Date: |
Tue, 4 Jan 2005 16:09:48 -0800 |
Reply-To: |
tanks-at-rctankcombat.com |
Thanks, guys.
How do you recharge your big 6v batteries?
Nick
Kingston Armored Defense Force
(A Force of One)
-----Original Message-----
From: tanks-admin-at-rctankcombat.com
[mailto:tanks-admin-at-rctankcombat.com]On Behalf Of Steve Tyng
Sent: Tuesday, January 04, 2005 5:57 AM
To: tanks-at-rctankcombat.com
Subject: RE: battery packs [TANKS]
Nick wrote:
> Who has the best advice about Hitec servo battery needs here?
I used a Hitec 1/4" scale servo (HS705MG) for the elevate in the T005. For
power I wired it directly to a small 6volt lead acid battery. It worked
fine. On the tank I'm building now I have even a larger servo (Hobbico
CS-80). I'm going to forgo the rechargeable battery route and just use four
alkaline AA or C-cell batteries to power the turret (elevate and turret Rx).
I recommend wiring any large scale servo power leads directly to your power
source. It will save you a lot of frustration chasing down Rx glitches
later on.
Steve T.