[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
|
From: |
"Aahz." <ErickKilmer-at-comcast.net> |
|
Subject: |
Re: Phil's Tank [TANKS] |
|
Date: |
Fri, 12 Oct 2007 08:23:53 -0700 |
|
Reply-To: |
tanks-at-rctankcombat.com |
> On 10/12/07, sasquevaneach-at-aim.com <sasquevaneach-at-aim.com> wrote:
>
>> Thanks to whoever came up with the "poor man's lathe" system of using a
>> drill on a stand as a lathe- it worked a treat and I now have acceptably
>> round drive shaft pulleys.
>>
Just something to keep in mind, most drills and drill presses are
not designed to handle a lot of side load like a lathe operation will
put on it. It'll wear out your tool much quicker than normal use.
Aahz.