[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: OdysseySlipways-at-aol.com
Subject: Re: road wheel bolt (w/suspension system) [TANKS]
Date: Mon, 8 Oct 2007 23:20:46 EDT
Reply-To: tanks-at-rctankcombat.com
In a message dated 10/8/2007 11:16:03 P.M. Eastern Daylight Time, ki4gyt-at-gmail.com writes:
Is your trailing arm threaded for the bolt?  If so, you thread the
bolt in until it's positioned right, and then tighten a nut on the
bolt up against the trailing arm to lock the bolt in place.
yes (when i have them made) they will be threaded - didn't think of a backing nut, but am not sure how limited i'll be for space back there (behind the trailing arm)
 



See what's new at AOL.com and Make AOL Your Homepage.