Re: M01 motors [TANKS]

["matthew" <matthewsanders-at-blueyonder.co.uk>]

thanks for that i may consider your motors more than others knowing that 12v 
can be used.

i may do a 2 speed with them at 12v and 24v for low and high speeds

matthew
----- Original Message ----- 
From: <anvilus9-at-comcast.net>
To: <tanks-at-rctankcombat.com>
Sent: Thursday, September 13, 2007 10:41 PM
Subject: Re: M01 motors [TANKS]


>
> -------------- Original message ----------------------
> From: "matthew" <matthewsanders-at-blueyonder.co.uk>
>> it would be great if you could test them at 12v as i do not yet have a 
>> hull
>> or motors yet as i am still trying to consider all options
>
> I tested my Tiger hull at 12V and 24V with M01 motors.
>
> The M01 motors are designed for 24V operation and provide
> plenty of torque for full-skid turns on a variety of terrains.
>
> The M01 motors provide sufficient torque for full-skid turns
> on pavement and low grass at 12V, but are not strong
> enough for full-skids in tall grass at 12V
>
> I do not recommend 12V operation in battles.  They
> are OK for 12V operation on pavement and lawns.
>
> Joe
>
> --
> Joe Sommer, Anvilus Machine Works
> 2378 Nantucket Circle, State College, PA 16803
> 814.234.4773     anvilus9-at-comcast.net
> http://www.anvilus.com
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.485 / Virus Database: 269.13.16/1004 - Release Date: 
> 12/09/2007 17:22
>
>