[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: Bob Bottomley <rbottomleysr-at-dslextreme.com>
Subject: Re: Phil's Tank... and drill bits [TANKS]
Date: Mon, 06 Aug 2007 17:30:50 -0700
Reply-To: tanks-at-rctankcombat.com 
It depends on the diameter of the drill bit, the smaller the diameter 
the higher the speed. A 1/8" drill will cut better at a much, much 
higher speed than a 3/8" bit.
Be sure to use cutting oil to prevent the drill bit from overheating.

Bob