[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: "Doug Conn" <dwconn404-at-comcast.net>
Subject: RE: aluminum cutting question [TANKS]
Date: Tue, 3 Jul 2007 23:29:35 -0400
Reply-To: tanks-at-rctankcombat.com

Thanks for the tips, everyone.


            - Doug


From: tanks-admin-at-rctankcombat.com [mailto:tanks-admin-at-rctankcombat.com] On Behalf Of OdysseySlipways-at-aol.com
Sent: Tuesday, July 03, 2007 8:26 PM
To: tanks-at-rctankcombat.com
Subject: Re: aluminum cutting question [TANKS]


In a message dated 7/3/2007 6:51:05 P.M. Eastern Daylight Time, smithd4-at-verizon.net writes:

I would suggest six teeth per inch on the blade max for blade life.

he's cutting metal not wood, you want more teeth than that per inch - but then they label the packets of blades for their uses


See what's free at AOL.com.