Re: "Ungrounding" EVWs? [TANKS]

[JOHN PITTELLI <jplily-at-yahoo.com>]

Yeah , that's what I meant. Hey, where did that tape
thing come from? Something new?


 --- Frank Pittelli <frank-at-rctankcombat.com> wrote:

> JOHN PITTELLI wrote:
> > With the cover off you'll see a large piece of
> copper
> > that extends to the outside case. Cut that off.
> 
> More precisely, trim the edges of that copper strip
> so that it doesn't 
> touch the case anymore.  A dremel cutoff wheel works
> nicely, but don't 
> cut too deep into the plastic below it.
> 
> Also, with the back off, you'll see three (maybe
> four) little tabs in 
> the back that have been pushed out of the back. 
> These tabs also touch 
> the copper strip to ground the back.  Simply push
> them flat so that they 
> can no longer touch the copper strip.
> 
> While you've got the back off, you should add a
> couple capacitors 
> between the two copper strips to reduce electrical
> noise from the motors.
> 
> Finally, cover the copper strip with a piece of
> electrical tape as a 
> safeguard for something wedging in the air holes of
> the back and 
> shorting it to them.
> 
>       Frank P.
> 



       
____________________________________________________________________________________
Get the free Yahoo! toolbar and rest assured with the added security of spyware 
protection.
http://new.toolbar.yahoo.com/toolbar/features/norton/index.php