[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: "Henry Verheggen" <henryverheggen-at-earthlink.net>
Subject: Re: wood filler [TANKS]
Date: Tue, 5 Jun 2007 16:30:14 -0400
Reply-To: tanks-at-rctankcombat.com
Thanks for the info.
 
 
----- Original Message -----
From:
Sent: 6/5/2007 3:36:36 PM
Subject: Re: wood filler [TANKS]

If he is just wanting to fill the grain in plywood, then sanding sealer is what he needs. It is available in any hardware store, not expensive, and will not get brittle and fall out because the surface pores of the wood soak it up and then once it dries a quick sanding and you can apply any paint you want after that.
 
Roy



See what's free at AOL.com.