|
Good points...
1.I used this tank as an exscuse to buy a welder
and teach myself to weld....
2. The welded in tabs will engage the
drive
3. Just pull the pins to remove a
section
4. really can't see 3 1/2 inch wide steel door
hinges breaking easily though...
Kurt ( Desert Dogs say "Long live the Alliance")
G
----- Original Message -----
Sent: Friday, May 11, 2007 3:27 PM
Subject: Re: Re: Neil, look what I found
[TANKS]
hello , 3 reasons
1/ I cant weld,
2/ the bolts engage the drive cog
3/ any part can be taken out and replaced
Ne "not the inventer but wish I was (I did`t invent this either)" il
>
> From: "Showa" <showa1-at-cox.net>
> Date: 2007/05/11 Fri PM 10:30:17 BST
> To: <tanks-at-rctankcombat.com>
> Subject: Re: Re: Neil, look what I found [TANKS]
>
>
-----------------------------------------
Email sent from www.virginmedia.com/email
Virus-checked using McAfee(R) Software and scanned for spam
|
How about welding them instead like this
???
----- Original Message -----
Sent: Friday, May 11, 2007 10:00
AM
Subject: Re: Re: Neil, look what
I found [TANKS]
There are nice little esc at 18-19.2 volt,
a 12 and a 6volt batery ,your laughing you are,
Esc`s are much more expensive at 24v
I may have decided on new tracks for tank II, see pic
just a little idea i came up with;-)
(Thanks Chrys)
Neil
>
> From: "Peter Arundel" <pureteenlard-at-hotmail.com>
> Date: 2007/05/11 Fri AM 11:28:57 BST
> To: tanks-at-rctankcombat.com
> Subject: Re: Neil, look what I found [TANKS]
>
> The motors are 180w golf trolley motors. I might over volt them at 18 or 24
> volts for a bit more speed and see how they survive - I will need some
> efficient cooling if I try that.
>
> As for my hull, I may need help - if only in the 'get off your arse and do
> something' department. I have plans to build this weekend. If I do nothing
> then I give you permission to visit me at any time, un-announced with a
> large whip or cattle prod to provide me with the right sort of motivation.
>
> Pete.
>
>
> >From: <funkyneroc-at-ntlworld.com>
> >Reply-To: tanks-at-rctankcombat.com
> >To: <tanks-at-rctankcombat.com>
> >Subject: Re: Neil, look what I found [TANKS]
> >Date: Fri, 11 May 2007 9:15:24 +0100
> >
> >
> >
> >
> >
> >
> >Yer cool, but its got two too many wheels for my liking.
> >Got your text about your motors,
> >thats good ,What are they?
> >do you need help with your hull?
> >
> >I`m hoping my marker comes today,but I reacon I`ll have to wait till
> >monday.
> >
> >Neil
> >
> > >
> > > From: "Peter Arundel" <pureteenlard-at-hotmail.com>
> > > Date: 2007/05/10 Thu PM 08:13:51 BST
> > > To: tanks-at-rctankcombat.com
> > > Subject: Neil, look what I found [TANKS]
> > >
> > >
> >
> >-----------------------------------------
> >Email sent from www.virginmedia.com/email
> >Virus-checked using McAfee(R) Software and scanned for spam
> >
> >
> >
> >
> >I was working on the M54 today. I stopped for lunch at about 12:30 and,
> >since I was close, I decided to eat my sandwiches in the new 'Cold War'
> >hall
> >at the RAF museum at Cosford.
> >
> >Look what I found.
> >
> >Sorry about the quality but I had to use the poxy camera on the company PDA
> >. . .
> >
> >_________________________________________________________________
> >Txt a lot? Get Messenger FREE on your mobile.
> >https://livemessenger.mobile.uk.msn.com/
> >
> >
> >HPIM0028.jpg
> >
> >HPIM0034.jpg
> >
> >
>
> _________________________________________________________________
> Could you be the guest MSN Movies presenter? Click Here to Audition
> http://www.lightscameraaudition.co.uk
>
>
-----------------------------------------
Email sent from www.virginmedia.com/email
Virus-checked using McAfee(R) Software and scanned for spam
07,5,8th
011.jpg |
Comet
track 2.jpg
|
