[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: "Philippe Lachapelle" <plachapelle-at-gmail.com>
Subject: Re: Motor [TANKS]
Date: Thu, 3 May 2007 23:16:39 -0400
Reply-To: tanks-at-rctankcombat.com

That might be a little short, if you gear it for enough tork to move your tank, it will be slower, the speed tradeoff will be too high. I've seen 250w motors recomendation on the site and in this maillist. Hope this will help.

On 5/2/07, Polanik <polanik-at-sasktel.net> wrote:
Would 150W 2700 rpm 18volt scooter motors work for a tank.



--
Philippe  Lachapelle
---------------------------------------------------------
Unyk: Philippe || http://www.unyk.com/
Pour avoir des contacts toujours exact!
For always up to date contacts!