[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: "Pete Curran" <petesboyz-at-iinet.net.au>
Subject: RE: cutting circles, Pete Curran [TANKS]
Date: Wed, 2 May 2007 17:08:48 +1000
Reply-To: tanks-at-rctankcombat.com


Looks like you have a good idea there, using the nuts and bolts, with the preset holes

You could use the same set with a table router and pin cutter




From: tanks-admin-at-rctankcombat.com [mailto:tanks-admin-at-rctankcombat.com] On Behalf Of funkyneroc-at-ntlworld.com
Sent: Wednesday, 2 May 2007 08:52
To: tanks-at-rctankcombat.com
Subject: cutting circles, Pete Curran [TANKS]


Pete , sorry for the delay.
My circle cutting method on a chop saw , see pics :-
I dont claim to have invented this ,It came to me after seeing your method, 
It`s a good Idea to hold the piece down with a nut to start with.
Email sent from www.virginmedia.com/email
Virus-checked using McAfee(R) Software and scanned for spam