[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: |
Frank Pittelli <frank-at-rctankcombat.com> |
Subject: |
Re: hot switches [TANKS] |
Date: |
Thu, 01 Feb 2007 16:24:56 -0500 |
Reply-To: |
tanks-at-rctankcombat.com |
Chrysanthos Kanellopoulos wrote:
> you might smile with my ignorance, however I must report that I used the
> half moon relay as described in the 'how to Articles' page, and the
> switches just get very hot with 18 V - 6 Amps. They get so hot to a
> point that their plastic parts melt down. The grease I used on the half
> moon disk and relays gets so hot that it burns and when I open the hatch
> of the tank it smells like a burnt hamburger! I then replaced them with
> brass switches, but they still get hot.
> What am I doing wrong?
Not sure which circuit you mean by "half moon relay" and really not sure
why there is any "grease" involved in an electrical circuit. So please
attach a simple drawing of the circuit, including the battery, switches
and motor. It sounds like you have a dead-short of some sort in the
circuit, which we should be able to determine from the diagram you send.
Frank P.