| From: | "Chrysanthos Kanellopoulos" <xchrysk-at-otenet.gr> |
| Subject: | Fw: switches? [TANKS] |
| Date: | Sat, 23 Dec 2006 18:14:58 +0200 |
| Reply-To: | tanks-at-rctankcombat.com |
|
----- Original Message -----
Sent: Saturday, December 23, 2006 6:14 PM
Subject: switches? Merry CHristmas
all!
I am finally adding a speed controller to my tank. WIthout it, it is
as described in the 'How to Articles' page, a bull in a china shop. Also, it
breaks the pins in the axles, when all 20 kilos start with the "5th
gear".
I would like to operate it from my two channel RC
transmittor and receiver. One channel is for the accelerator and is connected to
the speed controller. I 've bought one that will take my 18 Volts (and you don't
want to know the price - things in the US Are
cheaper). The other channel (the steer channel on the
transmittor) is supposed to operate a
servo with a switch. Anybody knows and is willing to tell me the type of switch and wiring I should use in order
for the switch to activate the left motor in one position, both motors in the
middle, right motor on the other end? as in my attached
image?
Any help will
be appreciated.
Chrys
|
