| From: | OdysseySlipways-at-aol.com |
| Subject: | Re: Bench testing cast track links [TANKS] |
| Date: | Sun, 3 Dec 2006 06:37:26 EST |
| Reply-To: | tanks-at-rctankcombat.com |
|
I am working on a quick drawing of casting the sleeve into a part (its just
a basic drawing).
as for the pin, I was thinking of putting in a pin that was shorter that
the overall width of the link and then threading in 2 small screws into the end
to hold the pin in place. I know this is a lot of work, but it's al I've ever
come up with. the pin would be small enough that it wouldn't touch the 2 screws
so they wouldn't get rubbed and made to back out any faster (if at all).
give me another 5 minutes or so and I'll have the drawing done I'm working
on
Chris,
Odyssey Slipways |