| From: | OdysseySlipways-at-aol.com |
| Subject: | Re: Bench testing cast track links [TANKS] |
| Date: | Sun, 3 Dec 2006 05:44:18 EST |
| Reply-To: | tanks-at-rctankcombat.com |
|
the dark gray area will only make contact on softer ground, the 3 lines up
top are nothing, (I said it was just something I whipped up quickly). if I get a
chance, I'll try to make the needed corrections and where the attachment chain
it to go.
On the master pattern, I have it so the tabs that stick out from the
sides of the chain will sit into the tread, making them flush except for the
rounded bolt heat that holds them in place. I'll have Ralph, once the masters
are done, to take pictures of the links with attachment chain on them (when he
gets them done). I'll also have him take some pictures of the bottom and also
see if he can cut a piece of the brass C-channel and lay it in place - but
that's when he gets them done.
Chris,
Odyssey Slipways |