Re: mold making question? [TANKS]

[Kevin Ross <kjrcartoons-at-yahoo.com.au>]

Hi tom

I use to fibreglass all the time is that what you are
talking about.

anyway I'll tell you how to do it write:

1) after making the plug you should coat it in a
sealent.(watered down PVC wood glue is good,)sand when
dry.

2)paint it with auto paint.

3)When happy with the paint job.

4) then I Give three coats of mold wax (not floor wax)

5) then two coats of PVC release.

It should come out clean.

If using the mold more then once you can then cut down
to two wax&one PVC.

Hope this helps

all best Kevin
--- burn995-at-aol.com wrote:

> You guys who mave made a few things with
> "procast",molds and parts.What is 
> your mold release you use?  Is it a wax or a pvc
> film?  I just made a mold and 
> destroyed my master plug due to the lack of ,or the
> wrong release. After two 
> hours of chiseling it out i saved the mold.Don't
> want to do the same with my 
> part.Tom in Tenn.
> 


Send instant messages to your online friends http://au.messenger.yahoo.com