[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: "Steve Tyng" <STyng-at-ACPTrust.com>
Subject: RE: Paintball guns [TANKS]
Date: Tue, 8 Aug 2006 16:49:00 -0400
Reply-To: tanks-at-rctankcombat.com
You cannot trip an e-frame solenoid directly from a 9volt (or 12v) battery.  I've tried.  You must keep the circuit board located in the handle of the e-frame.  Joe Sommer sells a trigger circuit that interfaces a generic e-frame to an Rx.
 
 

From: tanks-admin-at-rctankcombat.com [mailto:tanks-admin-at-rctankcombat.com] On Behalf Of Kevin
Sent: Tuesday, August 08, 2006 3:18 PM
To: tanks-at-rctankcombat.com
Subject: RE: Paintball guns [TANKS]

Find good pictures of any of the $70 to $200 Spyder to see a seer tripping solenoid.  They trip it from a 9 V battery so it doesn’t have to be that beefy a solenoid.

 

From: tanks-admin-at-rctankcombat.com [mailto:tanks-admin-at-rctankcombat.com] On Behalf Of OdysseySlipways-at-aol.com
Sent: Tuesday, August 08, 2006 2:12 PM
To: tanks-at-rctankcombat.com
Subject: Re: Paintball guns [TANKS]

 

Is the trigger really necessary? Can it done away with and use a solenoid in it's place somehow?

 

or was this talked about while i wasn't looking (close enough)