Hey I'm new here. I'm building a 1/6 scale Tiger. Bout all I have to
say.
----- Original Message -----
Sent: Monday, June 26, 2006 8:30 PM
Subject: Re: Tiger 1 road wheels
[TANKS]
burn995-at-aol.com wrote:
> Tom down here
in in Tenn.(transplanted from PA four years ago).Bought the
> tamiya
tiger 1 1/32 scale model for detail refrence on my 1/6 tiger. I noticed
> that the road wheel arms are in oppisite directions.left side face
aft and the
> right face fwd. Can anyone tell me what this does for the
tank and if it really
> matters on the scale models.Hope to have some
photos worth putting on the
> sight soon.thanks
>
http://tiger1.info/EN/TorsionBars.html
Like
George said... made for a tight, clean install.
I don't recall where I
read this, but (supposedly) the fact that the
tracks were the same for both
sides (but hung running in opposite
directions) had a slight affect on
straight-line running. I guess the
suspension arms hanging in opposite
directions could also have
contributed, but I seriously doubt this would
affect a 1/6 model.
Tigerfibel, anybody?
http://wwwzimmerit.com/main/pagineweb/tigerfibel.pdf
-
Steve "YMMV" Edwards
P.S. Panther and Tiger II combat tracks were
asymmetric -- there was
a definite left and right
track.