RE: electronic markers [TANKS]

["Steve Tyng" <STyng-at-ACPTrust.com>]

Doug wrote:

> You should be able to just replace the servo and trigger 
> button with wires from the receiver to the marker control 
> board. This should effectively turn the servo signal into the 
> trigger (button) signal that activates the firing sequence on 
> the marker control board.

This is incorrect.  If you want to get the servo out of the loop you
will need an electronic switch controlled by the Rx.  The electronic
switch replaces the switch in the eHandle of the marker.  Joe makes the
product you need, it's called the R/C Trigger.

http://www.anvilus.com/products.html


FYI, current battlers have found eTriggers to be very unreliable in
combat.  Most battlers have moved to door lock actuators.


Steve Tyng