[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: Joe Sommer <anvilus9-at-adelphia.net>
Subject: Re: Battery question [TANKS]
Date: Mon, 22 May 2006 22:19:00 -0400
Reply-To: tanks-at-rctankcombat.com


Chris,

At 10:53 AM 5/23/2006 +0930, "chris barthelson" <barthelson88-at-hotmail.com> 
wrote:
>I want to connect 4 batteries in a series parallel type setup. Can I use pic
>number two setup? The only diference is that the power wires dont conect to
>the other battery directly but they will still conect further down the line.

Both work OK.

You can use thinner wire for #2.

In #1 the current from both battery pairs flows out through one
positive wire attached to the top of the right pair and in
through one negative wire.

In #2, you have two wires to carry the current from the top 
positiveterminals, and two wires to carry current into the bottom negative
terminals.

Joe



**********************************************
Joe Sommer, Anvilus Machine Works
2378 Nantucket Circle, State College, PA 16803
814.234.4773     anvilus9-at-adelphia.net
http://www.anvilus.com