[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
|
From: |
<sthutch-at-charter.net> |
|
Subject: |
RE: Scooter motor [TANKS] |
|
Date: |
Thu, 4 May 2006 17:18:43 -0700 |
|
Reply-To: |
tanks-at-rctankcombat.com |
Steve,
Your proposal has some merrit to it. Since I know almost nothing about electricity
in general and electric motors in particular, learning this system may be easier.
However, I think a translation manual is called for in cases where individuals are
less inclined to move the more modern and relevant measuring system.
Thanks,
Todd "electricity is a Black Art" Hutchins
---- Steve Tyng <STyng-at-acptrust.com> wrote:
> Somebody wrote:
>
> > Also they have a 250 Watt - 24 Volt Electric Scooter Motor
> > XyD-6A2, 24 Volt, 250 Watt, 3000 R/Min , 15 Amp,
> > permanent-magnet motor. 11 tooth sprocket for #25 chain. 12
> > gauge power leads. Mounting bracket measures 4-1/2" x 2-1/8"
> > with 4 threaded mounting holes. There are 96 available.
> >
> > Would this be a good deal for 9.99 each
>
> $10 for a 250W scooter motor sounds like an OK deal. What are they
> charging for shipping? That's where some of the eBay vendors make up
> their money.
>
> This motor will give you 1/4 of the power of an EV Warrior at 24V.
>
> I propose a new official baseline power measurement for motor
> comparisons in the hobby. It would be called the Cromwell and would be
> equivalent to 1000 watts of power. In the metric system the Cromwell
> would be expressed as the "Tyng" (less letters for the Imperial
> challenged). In the case of the 24V/250W scooter motor it's power
> output would be expressed as 1/4 Cromwell's (or 250 Milli-Tyng's, 2.5
> Deci-Tyng's, or .25 Tyng's). An EV Warrior motor running on 12 volts
> (approx 300W) would output about 1/3 Cromwell's (or 300 Milli-Tyng's, 3
> Deci-Tyng's, or .3 Tyng's). This system would give the prospective tank
> builder an idea of the power and speed capability of their proposed tank
> project against a known performance variable in the hobby. IMHO this
> proposed baseline measurement system will do nothing but promote the
> hobby by cutting through the many arcane, obsolescent and incompatible
> power measurement systems currently in use today.
>
>
>
> Steve "It's all about the Hobby" Tyng