[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: "Steve Tyng" <STyng-at-ACPTrust.com>
Subject: RE: Tread Spacing on the TTS [TANKS]
Date: Mon, 17 Apr 2006 08:53:28 -0400
Reply-To: tanks-at-rctankcombat.com 
Todd wrote:

> That's what I am hoping to do, let the drive sprocket set the 
> spacing.

With a sprocket drive TTS the drive sprocket WILL set the spacing.

> Is 3/8" the correct spacing?

This depends on your sprocket design.  The sprocket teeth on the
Cromwell are 3/8" wide so the spacing on the Cromwell tracks is 3/8"
WHEN the track is wrapped around the sprocket.  The spacing opens up
when laying flat.


Steve Tyng