[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: "Doug Conn" <dwconn404-at-comcast.net>
Subject: RE: [TANKS] anyone here or use eMachineshop?
Date: Sun, 5 Mar 2006 01:44:05 -0500
Reply-To: tanks-at-rctankcombat.com

I used their sister service, Pad2Pad.com. It’s a PCB fab house. You use their software to layout your circuit board, upload your design, and they etch it. The vehicle I’m working on has a mini-PC to control it, and I needed a simple IO interface and driver board.


I liked the service. The PCB layout software was very easy to use, but also pretty limited. For example, there was no automatic trace routing. Still, it was fine for what I needed.


I don’t know if eMachineShop works as well as their Pad2Pad division. If it does, I would recommend it.


-        Doug


From: tanks-admin-at-rctankcombat.com [mailto:tanks-admin-at-rctankcombat.com] On Behalf Of OdysseySlipways-at-aol.com
Sent: Saturday, March 04, 2006 11:48 PM
To: tanks-at-rctankcombat.com
Subject: [TANKS] anyone here or use eMachineshop?


Click here: eMachineShop - Online Machine Shop - with FREE CAD Software

I just came across it in a forum and thought I'd pass it along.....

Odyssey Slipways