Re: was woundering [TANKS]

[Frank Pittelli <frank-at-rctankcombat.com>]

Bruder, John R LTC USA NORAD USNORTHCOM HQs J2 wrote:
> How did you attach the sprockets to your EV Warriors? Drill out a smaller
> size or use a collar?  If you used a collar, which type and from where?

When I bought my EVWs, they came with a steel bushing with an 8mm ID and 
a 1/2" OD (which was used to drive the bicycle wheel they were designed 
to propel).  So, I simply bought 1/2" ID sprockets and put a pin 
thruough everything.

I'll bet that a mechanical supply company sells metric/english bushings, 
but I haven't look for them myself because I already solved the problem. 
  The simplest way to make a similar bushing is to get some 1/2" bronze 
rod and drill out an 8mm hole with a lathe.

        Frank P.