| From: | "richardcampbell" <riccampbell-at-comcast.net> |
| Subject: | RE: Help with blown fuses [TANKS] |
| Date: | Wed, 16 Nov 2005 07:14:06 -0500 |
| Reply-To: | tanks-at-rctankcombat.com |
|
here are the specs of my particular Vantec
controller...
Voltage Range: 5-30...Continuos Amps (per
single motor) :20....Starting amps: 60(I guess this means that this is what it
uses to start then it drops to 20 during continuos use) I don't know if
this helps..thats whats on my spec sheet that came with the controller....as for
the fuses...I have both hooked up to the controller using dual 16 guage wire,
one goes directly to the + battery terminal, the other fuse wire from the
controller spliced into it, and I also have the on/off switch spliced into the
fuse wire....
Richard Campbell
|