re: thank you all [TANKS]

[Carla and Joe Devine <c.j.devine-at-sbcglobal.net>]

Hi,

  I forgot to ask about NAND gates and H-bridges. I just finished searching 
the www. looking for NAND gates and got really confused. Ok. I guess that a 
signal from the rx goes to the servo board. Then out-put goes to a NAND 
gate. Followed by a FET H-bridge, that controls how the voltage goes to the 
motor. If that is how a servo based ESC works than I think I could try it 
out. I have a small box of old servos,and there is a electronic surplus 
shop not too far from my house. I should be able to find the other parts. 
Any one else out there interested in this, or have any tips. Please let me 
know.

Thank you all

Joe in San Diego

Please note our new address: c.j.devine-at-sbcglobal.net


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.362 / Virus Database: 267.13.0/168 - Release Date: 11/14/2005