[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: "Marc en Wendy" <marcmethorst-at-zonnet.nl>
Subject: Channel mixing: the sequel [TANKS]
Date: Mon, 3 Oct 2005 13:09:23 +0200
Reply-To: tanks-at-rctankcombat.com

Matthew wrote:
> you will still need a way to power the motors though
Pete wrote:
> the mixing you are talking about would eliminate the h bridge, if you swap it for two ESC, one per motor.
Can I plug 2 ESC's (assuming you mean Electronic Speed Controllers) directly in the rx and connect them to the motors, and set the mixing on the tx? Would this make a proportional controlling system?