[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: Will Montgomery <wsmontg5-at-netscape.net>
Subject: Re: EV-X [TANKS]
Date: Sun, 14 Aug 2005 16:08:05 -0400
Reply-To: tanks-at-rctankcombat.com 
Chris use the high wire. You will notice it's much thicker wire. I ran 
the Panther on 18-24 volt at 9 to 1 gear reduction. It didn't have 
enough torque to turn well from a standing start. I would suggest about 
15 to 1 reduction -at- 18 or 24 volt's should be fine.

Will

barthelson88-at-hotmail.com wrote:

> Hi all,
>        I just purchased some ev-x motors from surpluscenter.com. I'm 
> wondering what speed I should run them on, high or low? I guess if I 
> run them on low speed they have more power? but the reduction has to 
> be smaller to get the same speed, so they kinda cancel each other out, 
> right?
> Any help.... anyone....
> Chris"Postage is killing me :-("Barthelson
>
> _________________________________________________________________
> REALESTATE: biggest buy/rent/share listings   
> http://ninemsn.realestate.com.au
>