[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: "Westbury, Billy" <billy.westbury-at-GPASS.CSA.scot.nhs.uk>
Subject: RE: Cad Format [TANKS]
Date: Fri, 5 Aug 2005 10:06:41 +0100
Reply-To: tanks-at-rctankcombat.com

Hi All 

I use a application call Sketchup, it fantastic and very easy to use, I have
used it to model my T34, attached are a couple of pics exported from
sketchup.

Billy

-----Original Message-----
From: tanks-admin-at-rctankcombat.com [mailto:tanks-admin-at-rctankcombat.com] On
Behalf Of Doug Conn
Sent: 03 August 2005 03:10
To: tanks-at-rctankcombat.com
Subject: RE: Cad Format [TANKS]

I use Visio because

A) I already have it, and
B) I know how to use it

It can be used alright for 2D drafting, but it's not ideal. I thought about
switching to TurboCAD ($130 US).

        - Doug

-----Original Message-----
From: tanks-admin-at-rctankcombat.com [mailto:tanks-admin-at-rctankcombat.com] On
Behalf Of Jaap Krol
Sent: Tuesday, August 02, 2005 11:31 AM
To: tanks-at-rctankcombat.com
Subject: RE: Cad Format [TANKS]

I use Autocad. As far as I rember more people use the program here.
Dwg is the standard file 9nowadays). Also dxf are used quite often.
On the web both file formats are used because of the world wide use of 
Autocad.
Greets,
Jaap

_________________________________________________________________
MSN Webmessenger doet het altijd en overal http://webmessenger.msn.com/

_________________________________________________________________ 
NHS National Services Scotland Disclaimer 

The information contained in this message may be confidential or 
legally privileged and is intended for the addressee only. If you have 
received this message in error or there are any problems please notify the 
originator immediately. The unauthorised use, disclosure, copying or 
alteration of this message is strictly forbidden. 
_________________________________________________________________ 

t34 3d 2.jpg

t34 3d 1.jpg