[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: "Steve Tyng" <STyng-at-ACPTrust.com>
Subject: RE: First bench test of MK2 TTS [TANKS]
Date: Mon, 1 Aug 2005 13:58:26 -0400
Reply-To: tanks-at-rctankcombat.com

Bart wrote:

> Will have to reinforce the 
> Aluminium angle and replace the rear axle with something 
> stouter (the axle visibly bends when under tension) before I 
> can get a good tight tension.

I reviewed your tensioner pic on your website.  In addition to beefing
up the mounting points and shaft.  You may want to consider moving the
tensioners as close as possible to the sides of the hull.  That way
you'll have less leverage force at the tensioning points on the shaft.


   Steve Tyng