Re: First bench test of MK2 TTS [TANKS]

["Bart Salmons" <shayguru-at-charter.net>]

Huh????

Ain;t that whut I just said?

Bart (bewildered at the moment) Salmons
Slammer 6
----- Original Message ----- 
From: "Grant Mahalek" <gmahalek-at-shaw.ca>
To: <tanks-at-rctankcombat.com>
Sent: Monday, August 01, 2005 11:58 AM
Subject: Re: First bench test of MK2 TTS [TANKS]


> Hey
>
> I think you may be heading of in the wrong direction perhaps......no 
> offence.....insufficient tension....
>
> Captain the dulithium crystal caannoot take much more of 
> this(ie.-tension)!!!!
>
> Grant
>
>
> ----- Original Message ----- 
> From: "Bart Salmons" <shayguru-at-charter.net>
> To: <tanks-at-rctankcombat.com>
> Sent: Monday, August 01, 2005 6:39 AM
> Subject: Re: First bench test of MK2 TTS [TANKS]
>
>
>> Half an inch...little more actually.   I suspect that a huge part of the 
>> problem was insufficient tension.  Will have to reinforce the Aluminium 
>> angle and replace the rear axle with something stouter (the axle visibly 
>> bends when under tension) before I can get a good tight tension.
>>
>> Bart Salmons
>> Slammer 6
>> ----- Original Message ----- 
>> From: "Steve Tyng" <STyng-at-acptrust.com>
>> To: <tanks-at-rctankcombat.com>
>> Sent: Monday, August 01, 2005 8:21 AM
>> Subject: RE: First bench test of MK2 TTS [TANKS]
>>
>>
>>> Bart wrote:
>>>
>>>
>>>> Does the vehicle's weight on the roadwheels help to keep the
>>>> TTS tracks from slipping off?  In about 4 inch high grass my
>>>> Shermanchasis wantto twistthe
>>>> tracks off.   any ideers?
>>>
>>> You need a tight tension.  How high are your guide teethe?
>>>
>>>
>>> Steve
>>
>