[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: "Marc en Wendy" <marcmethorst-at-zonnet.nl>
Subject: Re: First bench test of MK2 TTS [TANKS]
Date: Mon, 1 Aug 2005 16:26:41 +0200
Reply-To: tanks-at-rctankcombat.com

Amir wrote:

> I've got the same problem with the axle - I was thinking of replacing the 
> one I've got with steel tube - or anything that won't bend (suggestions?).

I used 20 mm aluminium tube for drive shafts; the shafts for the sprockets 
in the drive line are 12 x 1 mm tube. Very rigid and light, compared to 
solid ones. Both the alu and steel tubes don't bend under quite heavy 
tensioning.

Marc