Re: [TANKS] resin treads and wheels

[Frank Pittelli <frank-at-rctankcombat.com>]

Bill Hamilton wrote:
> 
> I'd ask specifically about the sprockets.  Resin should be fine for road 
> wheels, but the sprocket teeth will be experiencing a lot of shear 
> stress. 

The "Task 4" resin that she referenced is specially made for high-stress 
parts, like sprockets and wheels.  It has a longer curing time, but some 
very high Rockwell numbers.  Should work very well and last a long time 
if used with the standard resin on the inner tread, which are made from 
a softer material.

        Frank P.