Re: FOA ABS [TANKS]

[JOHN PITTELLI <jplily-at-yahoo.com>]

Richard, 
         First question. How much does the tank weigh
now? Most of the weight of our vehicles is the motor
and gear system, 20lbs, battery, 10 lbs, and wheels
and track. If the ABS is fairly light and you don't
have to reinforce any stress areas you could use drill
motors.


--- richardcampbell <riccampbell-at-comcast.net> wrote:
> RE: FOA ABS [TANKS]The thickness of the FOA tanks
> armor is approx 1/8" thick... give or take a
> bit...the turret is also the same thickness....the
> plastic is very sturdy and I believe it will hold up
> to paintball abuse..as for the outside mounted
> accessories...i.e. ,MG barrel...headlight...smoke
> launchers...fire extinguisher, front and rear mud
> flaps...etc...they may get blown off by the
> paintballs....I drilled a hole thru my MG barrel and
> strengthened it with a copper rod...as for my
> hatches, I drilled out the resin latches and
> attached them with copper rods so they can open and
> close..I've painted my Tank to represent the
> surviving Tiger in the movie"Kelly's Heroes", and I
> also converted a 1/6 tank commander to represent the
> fat faced German commander in the movie(Karl-Otto
> Alberty)..I will post some pictures of my Tiger and
> commander ASAP...like I said previously I'm not
> mechanically inclined in the art of RC converting
> and would appreciate it greatly if someone could
> email some instructions on how to get started and
> maybe also an idea on the best Items to make my tank
> run..I'm looking to keep my tank lightweight...under
> 100 lbs...
> 
> 
> Thanks
> Richard Campbell
> Augusta Ga...
> 
> 
>   ----- Original Message ----- 
>   From: Hunter Sgt Michael J 
>   To: 'tanks-at-rctankcombat.com' 
>   Sent: Tuesday, April 12, 2005 12:59 PM
>   Subject: RE: FOA ABS [TANKS]
> 
> 
>   speaking of turrets have anyone tried useing a
> lazy susan 
>   michael h 
>   temecula ca 
> 
> 
> 
>   -----Original Message----- 
>   From: richardcampbell
> [mailto:riccampbell-at-comcast.net] 
>   Sent: Tuesday, April 12, 2005 4:04 AM 
>   To: tanks-at-rctankcombat.com 
>   Subject: Re: FOA ABS [TANKS] 
> 
> 
> 
>   not sure how thick it is...will get back to you
> with the measurement....but 
>   I have one, and it seems to be pretty solid...the
> turret is pretty solid 
>   too...like I said I will get back with the
> measurement...right now I'm off 
>   to work... 
> 
>   Richard Campbell 
>   Augusta, Georgia 
> 
> 
> 
>   ----- Original Message ----- 
>   From: "chris barthelson"
> <barthelson88-at-hotmail.com> 
>   To: <tanks-at-rctankcombat.com> 
>   Sent: Tuesday, April 12, 2005 4:56 AM 
>   Subject: FOA ABS [TANKS] 
> 
> 
> 
>   > Hi all, 
>   > Does anyone know how thick the ABS field of
> armor use for their tiger's??? 
>   > 
>   > Chris. b 
>   > 
>   >
>
_________________________________________________________________
> 
>   > $60,000 prize pool to be won. Three winners.
> Apply now! 
>   > http://www.healthe.com.au/competition.do 
>   > 
> 


                
__________________________________ 
Yahoo! Mail Mobile 
Take Yahoo! Mail with you! Check email on your mobile phone. 
http://mobile.yahoo.com/learn/mail