[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
|
From: |
Joe Sommer <anvilus9-at-adelphia.net> |
|
Subject: |
Re: tracks [TANKS] |
|
Date: |
Thu, 17 Mar 2005 21:17:44 -0500 |
|
Reply-To: |
tanks-at-rctankcombat.com |
Adam and Frank,
At 03:39 PM 3/17/2005 -0500, Frank Pittelli <frank-at-rctankcombat.com> wrote:
>adam2 klosterman wrote:
>>have a look at this
>>http://www.kvpfalcon.com/products/pdf/820.pdf
>Looks like a good possibility for tracks. What's the cost per foot for 4
>inch wide?
McMaster-Carr sells it for $85 per 10 foot section (part #6378K22)
5 inch OD sprockets are $26 (part #6369K811)
You may be able to get it cheaper from Falcon.
I tried Dyna-Veyor's DV-400-LF820 which is a direct replacement.
http://www.rctankcombat.com/archive/2004-07/msg00019.html
It is very heavy and it will require the addition of cleats because
the surface is smooth.
Joe
**********************************************
Joe Sommer, Anvilus Machine Works
2378 Nantucket Circle, State College, PA 16803
814.234.4773 anvilus9-at-adelphia.net
http://www.anvilus.com