Re: Panzer3/ stug 3 [TANKS]

["Marc en Wendy" <marcmethorst-at-zonnet.nl>]

I'm building a StuG III and have been searching for the same drawings, 
without any luck.
Just take the side view drawings, enlarge them and guesstimate where the 
hull lines would be.
No one will check them, so don't bother about an angle or two ...

Regards,

Marc

----- Original Message ----- 
From: "Mike Snodgrass" <mdssail-at-yahoo.com>
To: <tanks-at-rctankcombat.com>
Sent: Friday, March 04, 2005 9:39 AM
Subject: Re: Panzer3/ stug 3 [TANKS]


> It might be better in the long run just to pick up a
> PZ. III 1/35 scale model to get those lines/dimensions
> from? It might be very difficult finding hull lines
> anywhere. I also tried to find PZ. III hull lines on
> the net and in books without success........
> hope this helps.
>
> --- chris barthelson <barthelson88-at-hotmail.com> wrote:
>> Hi all,
>> Does anyone have or know where I can find line
>> drawings of the panzer3 or
>> stug3 hull. Just the hull no tracks or wheels.
>> Because on normal line
>> drawings the tracks are always in the way and it's
>> hard to get a good idea
>> of the hull shape.
>>
>> Thanks, Chris. b
>>
>>
> _________________________________________________________________
>> Credit card. Apply now. 60 sec response. Must be
>> over 18. AU only:
>>
> 
>http://ad.au.doubleclick.net/clk;11046970;10638934;f?http://www.anz.com/aus/promo/first0105ninemsn/default.asp
>>
>>
>
>
>
>
> __________________________________
> Celebrate Yahoo!'s 10th Birthday!
> Yahoo! Netrospective: 100 Moments of the Web
> http://birthday.yahoo.com/netrospective/