Re: Transmission Help [TANKS]

["chris barthelson" <barthelson88-at-hotmail.com>]

I agree with John, a set screw with a good hold (loc-tite) and a flat piece 
on the shaft is pretty darn solid. What I did in my tiger (t030) was mounted 
the sprocket tightened the set screw to mark the shaft, and then drilled a 
hole slightly bigger than the screw a little bit into the shaft. Then 
re-tightened it all up. that way gives the screw a very good "seat" to 
settle into.

Chris. b

_________________________________________________________________
Hotmail's great for sending photos. Click here to find out more:  
http://www.imagine-msn.com/Hotmail/Post/Communicate/SendEmail.aspx