RE: tts track thickness [TANKS]

[Rick v100 <rickv100-at-yahoo.com>]

Steve, 

Thanks, I have to finish the suspension components but
I picked up a bandsaw recently and wanted to start
resawing some boards for the track. 

Is oak ok for the tracks?

Rick 

--- Steve Tyng <STyng-at-acptrust.com> wrote:

> I used 18 gauge 5/8" brads and my small air nailer. 
> The brads stuck out
> the other side a bit which was later sanded off on
> the belt sander.
> 
> Steve
> 
> > Subject: RE: tts track thickness [TANKS]
> > 
> > 
> > Steve, 
> > 
> > Thanks, when you through nailed the boards
> together
> > did you use brads or finish nails?
> > 
> > Thanks,
> > Rick 
> > 
> > --- Steve Tyng <SteveT44-at-comcast.net> wrote:
> > 
> > > Rick wrote:
> > > 
> > > > When you ripped your boards for the TTS system
> > > what
> > > > thickness did you rip to?
> > > 
> > > I think it was around 1/4" to 5/16".
> > > 
> > > Steve
> > > 
> > > 
> 



                
__________________________________ 
Do you Yahoo!? 
All your favorites on one personal page – Try My Yahoo!
http://my.yahoo.com