RE: tts track thickness [TANKS]

["Steve Tyng" <STyng-at-ACPTrust.com>]

I used 18 gauge 5/8" brads and my small air nailer.  The brads stuck out
the other side a bit which was later sanded off on the belt sander.

Steve

> Subject: RE: tts track thickness [TANKS]
> 
> 
> Steve, 
> 
> Thanks, when you through nailed the boards together
> did you use brads or finish nails?
> 
> Thanks,
> Rick 
> 
> --- Steve Tyng <SteveT44-at-comcast.net> wrote:
> 
> > Rick wrote:
> > 
> > > When you ripped your boards for the TTS system
> > what
> > > thickness did you rip to?
> > 
> > I think it was around 1/4" to 5/16".
> > 
> > Steve
> > 
> >