[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: Marmfam3-at-aol.com
Subject: Re: Wheels & Axles [TANKS]
Date: Thu, 20 Jan 2005 05:40:01 EST
Reply-To: tanks-at-rctankcombat.com

Will,
    Sorry, I made a typo (being sick is no fun!!!) my axles are 3/8".
 
                                                                                                                                            Morgan
 
In a message dated 1/19/2005 9:51:31 PM Eastern Standard Time, wsmontg5-at-netscape.net writes:
Morgan,

My axle are 1/2 " with 16" hole . With only 1/8" axle would be weakened too much.

Will

Marmfam3-at-aol.com wrote:
Will,
 
    Do you have any problems with the cotter/hitch pins for the wheels on your SU-100?  Would you recommend using them to keep 3/4" plywood wheels with bronze bushings on a 1/8" axle; or would the axle be weakened severely by drilling holes to put the pins in.
 
                                                                                                                                    Morgan