Re: Calling all experts

[Jim Neifert <jneifert-at-shaw.ca>]

Well, might have to get one from the surplus center, all the ones so far 
have gone for over 30 dollars, not bad for something you can buy for 18.95

Jim
----- Original Message ----- 
From: "Steve Tyng" <stevet-at-stcharlesmd.com>
To: <tanks-at-rctankcombat.com>
Sent: Monday, November 29, 2004 6:01 AM
Subject: RE: Calling all experts


> These assemblies use what looks like a standard gearmotor as it's first 
> stage.  A faster gearmotor could probably be retrofitted for faster 
> rotate.
>
> Steve
>
>
>> Subject: Re: Calling all experts
>>
>>
>> Jim,
>>     Frank and I tested one of those last week. They
>> definitely are strong, slow on 12volts but are able to
>> take 24 volts . As long as you have at least 5" from
>> base of turret to bottom of chassis it should work
>> fine. Like Joe Sommer said, Surpluscenter has them for
>> 18.95 plus about 7.00 shipping. Don't over bid as they
>> have 1,000 of them.
>>                            John
>>
>>
>> --- Jim Neifert <jneifert-at-shaw.ca> wrote:
>>
>> > Well if know ones says it won't work, going to bid
>> > on one and see. At least if I don't have to bid to
>> > high.
>> > Jim
>> >   ----- Original Message -----
>> >   From: Heidi/Nick Hoke
>> >   To: tanks-at-rctankcombat.com
>> >   Sent: Sunday, November 28, 2004 9:56 AM
>> >   Subject: RE: Calling all experts
>> >
>> >
>> >   Wow that's pretty intriguing..
>> >
>> >   The six-wheel Swampcat needs a turret motor; the
>> > first two I tried didn't
>> >   work because they weren't powerful enough. The
>> > armored turret spins
>> >   on a lazy susan turntable but it weighs over 40
>> > pounds, so I need a pretty
>> >   high torque motor. Would this motor work for me?
>> >
>> >   Nick H.
>> >   Kingston, Washington
>> >
>> >
>> >
>> >    -----Original Message-----
>> >   From: tanks-admin-at-rctankcombat.com
>> > [mailto:tanks-admin-at-rctankcombat.com]On Behalf Of Jim Neifert
>> >   Sent: Sunday, November 28, 2004 9:28 AM
>> >   To: tanks-at-rctankcombat.com
>> >   Subject: Calling all experts
>> >
>> >
>> >     Think these would work for the turrent rotation?
>> >           NEW 5" HIGH TORQUE CNC TYPE ROTARY TABLE
>> > W/ DC MOTOR Item number: 3855319882
>> >
>> >
>> >
>> http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&rd=1&item=3855319
>> 882&ssPageName=STRK:MEWA:IT
>> >
>> >     I am still trying to find something to do that
>> > with.
>> >
>> >     Jim Neifert
>> >     Abbotsford, BC
>>
>>
>>
>>
>> __________________________________
>> Do you Yahoo!?
>> The all-new My Yahoo! - What will yours do?
>> http://my.yahoo.com
>>
>>
>>
>>
>
>