[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Frank Pittelli <frank-at-rctankcombat.com>
Re: muzzle break
Fri, 22 Oct 2004 16:52:41 -0400
chris barthelson wrote:
> How did you make your muzzle break, it looks rather good.
> thanks, Chris. b
The original was shaped from cardboard and then coated with epoxy. That
didn't survive being run over, so the second one was cut out from a
solid piece of MDF on the lathe and then glassed over. Heavier, but
much more durable. A cardboard muzzle that is glassed over will be
lighter and should be sturdy enough.
- muzzle break
- From: "chris barthelson" <barthelson88-at-hotmail.com>