[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: Jim Neifert <jneifert-at-shaw.ca>
Subject: Re: Ev's & Sprokets
Date: Tue, 05 Oct 2004 05:20:59 -0700
Reply-To: tanks-at-rctankcombat.com

I have used a bushing to install with. I pinned the bushing to the EV shaft 
using a spring pin, then drilled the bushing out so a set screw on the 10 
tooth sproket goes through the bushing and againest the EV shaft.

Abbotsford, BC
----- Original Message ----- 
From: "chris barthelson" <barthelson88-at-hotmail.com>
To: <tanks-at-rctankcombat.com>
Sent: Monday, October 04, 2004 6:15 PM
Subject: Ev's & Sprokets

> Hi all
> to all the people using ev's. How did you attach say a 10 tooth or sproket 
> in general to an 8mm shaft??? did you go with the bushing style attachment 
> or something more complex???
> Thanks, chris. b
> _________________________________________________________________
> FREE* Month of Movies with FOXTEL Digital: 
> http://adsfac.net/link.asp?cc=FXT002.7542.0