[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: Jim Neifert <jneifert-at-shaw.ca>
Subject: Re: EV Warriors
Date: Sun, 29 Aug 2004 05:25:39 -0700
Reply-To: tanks-at-rctankcombat.com
Use the two outside ones, not sure what the center one is for but you can forget about it. Pos and Neg on the outside ones, change which and the motor runs in reverse. You will note that it runs higher rpm in one direction depending on if its a CCW or CW motor. Both mine are CCW motors.
 
You can use a standard auto female spade connector to attach to the wires, but a proper connector would be nice. I am just using the auto spade connector.
 
Jim
Abbotsford
----- Original Message -----
Sent: Sunday, August 29, 2004 4:16 AM
Subject: RE: EV Warriors

I would really like to know what the prongs are for on my EV Warriors (ground, positive, negative, etc.) so that I can test them.
 
                                                                                                            Morgan