Re: Tiger Wheels

[paul needham <paul.2.needham-at-btconnect.com>]

Hi all

I have cut wooden wheels just using a bench saw , I still have a even 
number of fingers just not prepared to say how many !
see here
http://home.btconnect.com/british_tanker/hetzer-tracks.htm

paul

At 14:58 22/08/2004, you wrote:
>Marmfam3-at-aol.com wrote:
>>Where did the road wheels come from for t021 and t001?
>>
>
>The road wheels for T001 are made from 3/4" plywood that was rough cut on 
>a bandsaw and then finished on a lathe.  If you don't have a lathe, you 
>can finish them with a simple jig on a belt sander (that's how the 
>original T001 road wheels were done).  And if you're the "Wood King" (aka 
>Mr. Tyng) you can even make them effectively with a chop saw, table saw, 
>or presumably a chain saw as well ;-)
>
>         Frank P.
>
>
>