Re: Tiger Wheels

[Frank Pittelli <frank-at-rctankcombat.com>]

Marmfam3-at-aol.com wrote:
> Where did the road wheels come from for t021 and t001?
>  

The road wheels for T001 are made from 3/4" plywood that was rough cut 
on a bandsaw and then finished on a lathe.  If you don't have a lathe, 
you can finish them with a simple jig on a belt sander (that's how the 
original T001 road wheels were done).  And if you're the "Wood King" 
(aka Mr. Tyng) you can even make them effectively with a chop saw, table 
saw, or presumably a chain saw as well ;-)

        Frank P.