[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: "WJ" <WJ-at-vdtogt.nl>
Subject: Re: Drive Axle Shaft
Date: Mon, 2 Aug 2004 18:59:34 +0200 (CEST)
Reply-To: tanks-at-rctankcombat.com

As you might have seen on my website I use 12mm steel. My decision was
made by checking what the most common diameter was and what the cheapest
bearings were , , ,

> I was wondering what most people use for the main drive axle shaft? I have
> some 5/16 steel shaft I thought would work, just would have to make my own
> hubs for it since I can't seem to find any for mounting sprokets on it.
> Thanks
> Jim