[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: William and Melissa Johns <gizmology-at-gizmology.net>
Subject: Re: Re: PBM update
Date: Sat, 17 Jul 2004 14:31:42 -0400
Reply-To: tanks-at-rctankcombat.com

At 03:02 AM 7/17/2004, Boris "need a real muzzle" Harpman wrote:
>May I ask what is the accurate range of the paint you are shooting ?

Well, it was reasonably accurate out to twelve feet, the long dimension of 
my shop...

>What is a new barrel worth in the states ? and would it
>solve the problem ?

   I have no idea, I haven't checked.  I don't think so, though it may help 
some if the paintballs aren't quite as tight.  I am using a piece of 0.680 
ID titanium pipe for a barrel.

   I think the problem is a combination of low pressure and poor flow 
through the valve, which has only 3/16" ports.

At 07:01 AM 7/17/2004, Will Montgomery wrote:
>We are not regulating the CO2 pressure.  The CO2 tank pressure is around 
>800 psi.

Good lord.  I liked John's 275 psi a lot better.  Where the hell am I going 
to find a solenoid valve that can handle 800 psi?



"That fear created the gods is perhaps as true as anything so brief could 
be on so great a subject." - Santayana