[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Hiya guys, wanted to keep you guys posted, I am very eager to get myself a
designation on the RCTANKCOMBAT site ;)
Anyways, my uncle gave me two markers to play with, so first thing I did
was dis-assemble one, and fit it in my newly-built turret. Check out the
pictures :)
Im still figuring out:
1. How to rotate my turret, and how to fix it on top off the hull.
2. How to build the motor mounts.
3. How to solve the holes in my hull that are 1mm too big for my bearing.
I have to be sure to properly install the bearings. (Lined up and
straight)
Anyways, I'm hoping to get my chain+sprocket soon, so I can start figuring
out the mechanical part of the hull.
Does anyone have a solution for connecting my axles to my wheels? I
decided to make the axles 12mm, but the bearings in my wheels are 20mm. I
can take the bearings out and that leaves me a hole of about 35mm.
Should I just poor it full of Ressin and drill a new hole?!
preview.jpg
preview2.jpg
gun.jpg