Re: EV Warrior power/voltage

["flier" <FLIER-at-sbcglobal.net>]

I'm setting my mixer up to use 12 volts over most of 
the range with 24v kicking in at the extremes of 
stick movement.  I was going to have high speed spin 
turns available but I'm second thinking that one as 
it sounds like most maneuvering would be done using 
12v.

No-load looks to be around 2.6A and stall is anywhere 
from 100A to 200A depending on source voltage but 
what sorta currents are you guys drawing on average?

Thanks!

Ted


--- Original Message ---
From: Frank Pittelli <frank-at-rctankcombat.com>
To: tanks-at-rctankcombat.com
Subject: Re: EV Warrior power/voltage

>Flier wrote:
>> 
>> I believe they're rated at 24v but if run at 12v 
will they give about half
>> the speed/power? 
> >
>
>Yes.  They have plenty of power/speed at 12v and 
they'll give out even 
>more power/speed at 18v or 24v.  Of course, they 
will also consume more 
>energy and generate more heat, so you'll need to 
plan accordingly (e.g., 
>heavier wiring, more cooling, bigger batteries, etc).
>
>       Frank P.
>
>
>
>